November 17, 2026
Metal Trolley Production & Fabrication

When you search for metal trolleys production, trolley fabrication or metal roll trolleys, you are not looking for a catalogue. You are trying to work out whether a factory can take your drawing, your load figure and your route, and build the cart without turning it into a six-month engineering project. This page answers that question with our own workshop, our own photographs and the numbers we actually build to.
What “production” means at our workshop
Doing Metal is the trolley line of Ningbo Fulei Metal Products. The same people cut, bend, weld, coat and assemble your cart in one flow in Ningbo, so there is no hand-off between a trading office and a separate subcontractor. You deal with the people who set the jig.

The five production steps, with what you receive
1. Drawing and load review
Send a CAD file, a dimensioned sketch or a photo of the cart you are replacing. We confirm deck size, rated load, how the load is distributed, aisle and door clearances, floor condition and caster layout before anything is cut. If you supply the CAD file, sample and first article normally take 10-15 days. If we prepare the drawings for you, allow 15-20 days—the drawing stage is real work, not a formality.
2. Laser cutting
Tube and sheet are cut to the released drawing in-house. Deck plate runs 0.8-3.0 mm, frame tube Ø20-50 mm round or square, wall 1.2-3.0 mm. fibre laser cutting keeps hole positions and tab geometry consistent across the first article and the repeat order.

3. CNC bending and jig welding
Shelves, returns and guards are formed on press brakes, then frames are welded in a jig so the geometry repeats, not just the first unit. Tube frames, sheet bases, mesh panels and reinforced deck edges are all welded on site.

4. Surface treatment
Powder coating is applied in our own line at 60-80 µm dry film. For wash-down and outdoor routes we build in stainless 304/316 or galvanized finish instead. We tell you which finish suits your cleaning routine rather than defaulting to paint.

5. Assembly, inspection and export packing
Casters, brakes, handles and shelves are fitted as one trolley, not shipped as a parts kit unless knock-down packing is what you asked for. Each trolley is checked against the released drawing and load requirement. Then it is wrapped, crated or palletized for the container.


Range we build to
| Item | Range | What sets it |
|---|---|---|
| Rated load | 80-1,000 kg per trolley | Load distribution, route gradient, safety factor |
| Frame tube | Ø20-50 mm, round or square | Load path and unsupported span |
| Wall thickness | 1.2-3.0 mm | Material grade and load |
| Deck plate | 0.8-3.0 mm | Deck load and support span |
| Caster diameter | 75-200 mm | Floor, debris, kerbs, push effort |
| Material | Carbon steel, stainless 304/316, aluminium, mesh | Cleaning method and corrosion exposure |
| Finish | Powder coat, hot-dip galvanized, stainless finish | Service environment |
| MOQ | 50 units; from 10 for large or heavy builds | Size, tooling, packing volume |
| Sample / first article | 10-15 days with your CAD; 15-20 days if we draw | Drawing complexity and material sourcing |
Bureau Veritas audited our parent factory in October 2026 (report MIC-ASR263630). We describe exactly what that audit covers and what it does not on our certificates and traceability page.
Where to go next
If you want to see what a finished cart looks like by type, start with our trolley range or the cage trolley and platform trolley pages. If you are still deciding between a stock trolley and a custom build, our modular vs one-off guide sets out the trade-off. When you are ready, send the drawing, the load and the quantity and we will confirm what is buildable and what it costs.
Who We Are
Doing Metal is the trolley-focused manufacturing site of Ningbo Fulei Metal Products. Founded in 2016, we build custom metal trolleys in our own workshop — from a drawing, a photo or just a clear idea of the job.
Our Ningbo floor handles the full route in house: laser cutting, CNC bending, welding and riveting, leveling, powder coating, assembly and inspection. One team, one drawing, one accountable partner — from the first sample to a controlled repeat order.
We are an independently audited factory (Bureau Veritas report MIC-ASR263630) and we state our credentials plainly.
Get to know us →Have a Similar Trolley Project? Send It for Review
Send your trolley type, load capacity, size, wheel requirement, quantity, and drawings or reference photos. Our team will review the structure and reply within 24 hours on business days.
Urgent project? Email gao@doingmetal.com or WhatsApp +86 18158549983.