OEM Projects
Choosing a custom manufacturer is a decision about risk as much as price. The most useful evidence is not a capability list — it is what happened on a previous project with a problem similar to yours. This page collects real custom trolley projects with the requirement, the engineering problem and how the build was checked before delivery.
Every project below is real. We do not publish client names without permission, and we do not invent volumes or certifications. Photos marked workshop show our own production — not a client’s finished product.
Folding Produce Trolley — European Wholesaler (Latest Sample)
A custom sample just off our shop floor for a European produce wholesaler. The brief: move fresh fruit and vegetables through wholesale purchasing, carry more per trip, and fold flat when the day is done. We widened and lengthened the deck, built the frame to fold for storage, and are now refining the details with the customer in real use — the mark of a genuine custom programme, not a catalogue sale.


More Documented Projects
Three-Tier Storage Trolley — Factory Product Handling
Requirement: a rolling storage unit for a factory to hold and move finished products on the shop floor.
Engineering challenge: keep parts contained while the trolley is parked or pushed — three stainless tiers with full guard rails, a welded frame and casters rated for loaded movement.
Library Book Trolleys — Ongoing OEM Programme, South Korea
Requirement: A multi-SKU range of book trolleys for private-label supply, with consistent finishes across a growing product family.
Engineering challenge: Combining steel tube strength with aluminium shelf options, controlling noise and keeping quiet-running casters consistent across variants.
500 Tennis Ball Pickers — European Order
Requirement: 500 roller-style ball pickers with collection hopper and decorative panels, built to a buyer’s reference design.
Engineering challenge: The reference left key decisions open — brush contact, hopper capacity, caster spec. On a 500-unit order each open decision repeats five hundred times.
Nestable Trolleys — 500 Units for Fresh Produce
Requirement: A high-volume run of nestable trolleys for a fresh-produce operation, where empty return volume directly affects freight cost.
Engineering challenge: Nesting geometry has to stay reliable over hundreds of units — a small variation in angle stops the stack.
Medical Equipment Trolleys — 1,000 Units
Requirement: A thousand-unit programme of medical trolleys with controlled finish, documentation and repeat-order consistency.
Engineering challenge: At this volume the real test is making the thousandth match the first, with the same drawing revision, finish and inspection record.
From a One-Line Brief to a 300 kg Trolley
Requirement: The buyer gave one line describing what the trolley had to carry and where it would run — no drawing.
Engineering challenge: Translating a functional description into a buildable structure: frame size, sheet thickness, caster rating and a first article the buyer could test.
Kart Lift Trolley — Built From a Reference Photo
Requirement: A custom lift trolley developed from a reference photo rather than a CAD file.
Engineering challenge: Confirming dimensions, load path and lifting geometry from images, then producing a drawing for approval before cutting.
How We Work, Regardless of Project Size
Across these projects the pattern is the same: clarify the real requirement, turn it into an approved drawing, build and check a first article, then keep the drawing, finish, caster model and packing controlled for every repeat order. We protect customer designs by default and do not show one buyer’s product to another — no confidentiality agreement is needed to start a conversation.
Our factory has been independently audited by Bureau Veritas (report MIC-ASR263630, dated 2026-10-09). We state what we can verify and do not claim certifications we do not hold; the position is on our Certificates & Traceability page.
Have a Project Like These?
Send us the requirement — a drawing, a photo or a one-line description of what the trolley must do. We will tell you what we need to confirm, how we would build it, and give you an honest sample lead time and quote.
Who We Are
Doing Metal is the trolley-focused manufacturing site of Ningbo Fulei Metal Products. Founded in 2016, we build custom metal trolleys in our own workshop — from a drawing, a photo or just a clear idea of the job.
Our Ningbo floor handles the full route in house: laser cutting, CNC bending, welding and riveting, leveling, powder coating, assembly and inspection. One team, one drawing, one accountable partner — from the first sample to a controlled repeat order.
We are an independently audited factory (Bureau Veritas report MIC-ASR263630) and we state our credentials plainly.
Get to know us →Start Your OEM Trolley Program
Send your trolley type, load capacity, size, wheel requirement, quantity, and drawings or reference photos. Our team will review the structure and reply within 24 hours on business days.
Urgent project? Email gao@doingmetal.com or WhatsApp +86 18158549983.